ER-011599 ER-050195 EROWA定位片100 M8 (一套10组)
 

ER-011599 ER-050195 EROWA定位片100 M8 (一套10组)

规格:防腐蚀,每组含4个M8的支撑脚和4个M5螺钉 应用:工件和电极 安装:直接装于毛坯的平面上

  • 品  牌:EROWA_爱路华
  • EROWA夹具定位片ER-011599/ER-050195
    EROWA ITS定位片
    定位片是夹持电极的最经济的基础件。它可直接装于电极毛胚上。这样,电极的夹具也与ITS匹配。
    安装孔的布孔只需简单地用钻孔模板或用在NC编程的方法,直接在胚料上钻孔。
    技术参数
    ITS定位片
     材料
     防腐蚀
     在卡签署上的系统精度
     0.002mm
    规格
     定位50
     小型电极
    定位片100 M8
     工件和电极
     定位片G
     工件,切削加工中的夹具
     操作
     用EROWA搬运系统或电极交换装转置

    ER-011599,EROWA定位片100 M8 (一套10组)

    ER-050195,EROWA定位片100 M8 (一组)

    规格:防腐蚀,每组含4个M8的支撑脚和4个M5螺钉

    应用:工件和电极

    安装:直接装于毛坯的平面上


    ER-011599 Centering Plate 100 M8 (set of 10 pieces)

    ER-050195 Center ing plate 100 M8 (1 Unit)

    Version: Corrosion-resistant, including 4 supporting fee M8 and 4 X M5 screws per plate.

    Application: Workpieces and electrodes.

    Mounting: Mounted directly on of blank plane surface of blank

    ER-011599 ER-050195 EROWA定位片100 M8 (一套10组)

    ER-011599 er-050195 erowa定位片100 m8 (一套10组)

    Centering plate 100 M8

    Check package contents
    Centering plate
    Base plate
    Support foot M8
    Bolts M5
    Washer ø 5.3 / 10 x 1

    ER-011599 er-050195 erowa定位片100 m8 (一套10组) title=

    Technical data
    Application: for electrodes of min. ø 100mm and 90mm
    A ) Base plate(thickness: 0.6mm)
    B ) Centering plate (thickness: 0.6mm)
    C ) Positioning mark and reference marks
    D ) Support foot SW13 M8x16

    ER-011599 er-050195 erowa定位片100 m8 (一套10组) title=

    Setting up
    Preparations
    - Machine the surface to which centering plate is to be fitted. Note that turning provides a more even surface than milling.
    - Drill holes according to the pattern shown below. For this purpose, we supply a drill template ER-010710 (option) as an option. The hole pattern can also be produced with the help of an CNC machine.

    Note:
    The ø 8mm and ø10mm holes are to accommodate the prismatic spigots of the rapid-action chuck and must therefore be drilled in any case.
    The ø 4H7 holes are only necessary if the centering plate must be aligned in relation to a given reference surface.

    ER-011599 er-050195 erowa定位片100 m8 (一套10组)

    Assembly
    Put base plate on the hole pattern of the blank.
    Put centering plate on top in the congruent position.

    Note:
    The positioning marks (A) must be visible on the side of the support feet. If a reference surface has been given, the reference surface has been given, the reference marks must refer to it.

    ER-011599 er-050195 erowa定位片100 m8 (一套10组)

    - If necessary, align centering plate with ø4 straight pins. Remove the straight pins after the alingnment.
    - Turn the 4 support feet into the M8 threads (C) and tighten to 35 Nm.
    - Turn the 4 screws M5 (B) with washers (G) into the M5 threads (B) and tighten to 6Nm.

    ER-011599 ER-050195 EROWA定位片100 M8 (一套10组)

    After assembly, grind the support feet to the tolerated measurement of 11.2 +0.01/-0.05 (D). Try to achieve an evenness of 0.001mm. If necessary, lap the support feet.

    ER-011599 ER-050195 EROWA定位片100 M8 (一套10组)

    Note:
    Measuring points on the mounting surface are possible in the notches (E) or beside the plates (F), depending on the version.

    ER-011599 er-050195 erowa定位片100 m8 (一套10组)

  • 工装夹具

  • 加工夹具
  • 精密虎钳
  • 吸盘
  • 卡盘
  • 夹紧元件
  • 五金工具

  • 管道加工设备
  • 去毛刺工具
  • 通用工具
  • 新品推荐

    一周热销排行